CNC Controller

Posts Tagged ‘mach3’

The original controller board and the software comes with the small machine that I imported from China wasn’t very good and not user friendly. So, I replaced it with a CNC card(I’m selling it) and driven it by Mach3. It’s much faster and it can do both engraving and cutting. But user must familiar with CAD system like Mach3,ArtCam and should be good in CorelDraw or some other graphic utlity. This machine is not good for ‘no tech’ user. But with the modified version, user can do much more than the original system!

Tags: control, Cutting, Driving, engraving, laser, Mach2, mach3, Machine

Homebuilt CNC demo with rapids of 13500mm/min. Gecko201 drivers, 640oz-in steppers and Mach3.

Duration : 0:0:32

Tags: cnc, diy, gecko, haydn812, mach3, rapid, router, stepper

CNC to Art Video Series Video 10:
This is the CNC Video series on how to take an image to a CNC File. This process is one that many CNC Users want to know, but there is not much info on. Here is your chance to get the inside scoop.

For more information, please go to: http://www.cncinformation.com

Before we head out to the shop and begin CNC Plasma Cutting, we will check out our G-Code program in Mach 3. This will give us some confidence when running our CNC Program.

Mach 3 is a great CNC Control Program. It takes our G-Code and converts it into Signal for the CNC Controller. The CNC Controller then sends the signals out to either Servo Motors or Stepper Motors. These motors then move the axis to create motion.

Duration : 0:6:38

Tags: aided, art, build, cam, cnc, Computer, control, diy, forum, gcode, links, Mach, mach3, manufacture, SheetCam, software, tutorial

This machine is a small PCB sized milling and drilling machine. The spindle is custom built and uses a scaled down version of an R8 collet. It will be an automatic tool changing spindle once I get the tool rack made. The spindle runs at 24,000 RPM. Rapids of the machine are only 600 IPM at this time as I only have a 35 volt power supply for the steppers.

General specs are:
Accepts 1/8″ shank tools
24,000 RPM spindle
20 tool capactity
Auto tool length measuring
9.5″ X travel
15.5″ Y travel
3.5″ Z travel
600 IPM rapid rates
.0005″ resolution (Min. increment)
Currently running on MACH3 software

Duration : 0:0:43

Tags: cnc, diy, drilling, mach3, machining, PCB

This is a small CNC machine that I made. Unit is about 26 pounds. Cutting area is 4.5x by 5y by 3z. It uses THK actuators. I use dampers on all the steppers to help with vibration. Home switches are currently installed on the x and y.

Duration : 0:6:1

Tags: BobCAD, Burrell, cnc, David, diy, dremel, Homemade, mach3, mill, milling, NCPlot, Neo7.com, Neo7cnc.com, router, v2, v23

Panacaguyhttp://gdata.youtube.com/feeds/api/users/panacaguyEntertainmentDIY CNC, Stepper Motors, Mach3CNC Stepper Motors Test

Duration : 0:0:28

Tags: diy-cnc, mach3, Stepper Motors

CNC turning crankshaft disk on emco compact 5cnc retrofitted to mach3

Duration : 0:2:56

Tags: 5cnc, cnc, compact, crankshaft, disk, EMCO, mach3, on, retrofitted, to, turning

DIY CNC lathe conversion in progress. Just one axis and chuck rpm is working at this stage. Waiting for other axis parts to come. Mach3 as controlling software.

Duration : 0:2:9

Tags: chuck, cnc, diy, lathe, mach3, rpm, sorvi

Ultra compact and light-weight CNC milling machine idealic for complex cutting, hole making and engraving.

contact VMU AB, Västerås maskinutveckling, for more info:
info@vmuab.se
www.vmuab.se

Duration : 0:1:53

Tags: cnc, mach3, milling, portable, router, SheetCam, vmu

Model Shop CNC, Inc Mill/Lathe/Drill CNC retrofit kit video. Shows a converted machine CNC lathing, Milling and drilling.

Duration : 0:3:29

Tags: cnc, Computer, control, drill, dro, lathe, Mach, mach3, Machine, manual, mill, model, shop