Posts Tagged ‘diy’
CNC MACHINE Rockcliff 4 AXIS STEPPER Motor Driver
Rockcliff Machine Inc. Stepper Motor Drive
Duration : 0:0:43
DIY CNC Rapid demo
Homebuilt CNC demo with rapids of 13500mm/min. Gecko201 drivers, 640oz-in steppers and Mach3.
Duration : 0:0:32
Posted in DIY CNC Controller | 
Tags: cnc, diy, gecko, haydn812, mach3, rapid, router, stepper | 
18 Comments »
DIY CNC testing speed and tool
I use a 3 mm thick medium balsa and 2mm diameter milling tool (a cheapo one) to test how it will cut at 10mm/s feed rate.
Holly smoke!!
I am still waiting the proper tools I ordered couple days ago.
Duration : 0:1:35
CNC Stomp Pad 6 | CNC Plasma Cutting Video Tutorial | CNC
Last video we checked our g-code to make sure our program was correct. Now we go out to the shop and do some work. We zero out the CNC Plasma Cutter and start cutting our aluminum stomp pad. Once we are done, we look it over and note the slag or dross we will have to grind off next.
http://www.cncinformation.com
Duration : 0:4:38
CNC to Art Video 10 – Mach 3 G-Code Verify – CNC …
CNC to Art Video Series Video 10:
This is the CNC Video series on how to take an image to a CNC File. This process is one that many CNC Users want to know, but there is not much info on. Here is your chance to get the inside scoop.
For more information, please go to: http://www.cncinformation.com
Before we head out to the shop and begin CNC Plasma Cutting, we will check out our G-Code program in Mach 3. This will give us some confidence when running our CNC Program.
Mach 3 is a great CNC Control Program. It takes our G-Code and converts it into Signal for the CNC Controller. The CNC Controller then sends the signals out to either Servo Motors or Stepper Motors. These motors then move the axis to create motion.
Duration : 0:6:38
PICSTEP “Dragon” DIY CNC Router Electronics TEST – 1
First test run of my electronics for my DIY CNC Router project.
* (3) DIY PICSTEP drivers CUSTOM 1/8 microstep
* DIY PMinMO 4 axis break-out board
* DIY PC fan controller
* Modified Japan 36vdc PS pushing +/-50 VCD
Crappy Dell 1.8 P4??
Will have more details at www.RockstarCNC.com at some point.
Testing basic functions and heat. Settings on software are very basic and have not been tweeked or adjusted YET.
More details at: http://www.RockstarCNC.com
~v3gaS~
Duration : 0:2:12
Posted in CNC Router Controller |
Tags: cnc, diy, Dragon, drivers, Fan, JohnnyVegas, Mod, Motor, Picstep, PMinMO, RockstarCNC, stepper, test, v3gaS |
No Comments »
First run of DIY CNC
This machine is a small PCB sized milling and drilling machine. The spindle is custom built and uses a scaled down version of an R8 collet. It will be an automatic tool changing spindle once I get the tool rack made. The spindle runs at 24,000 RPM. Rapids of the machine are only 600 IPM at this time as I only have a 35 volt power supply for the steppers.
General specs are:
Accepts 1/8″ shank tools
24,000 RPM spindle
20 tool capactity
Auto tool length measuring
9.5″ X travel
15.5″ Y travel
3.5″ Z travel
600 IPM rapid rates
.0005″ resolution (Min. increment)
Currently running on MACH3 software
Duration : 0:0:43
Joe CNC 2006 cutting mdf parts
Cutting some 3/4″ MDF parts for the new CNC Router. Running at about 100IPM with Mach3 and a xylotex controller programmed the toolpaths with vcarve from vectric. Long live DIY, enjoy. 
Duration : 0:4:0
Homemade Mini CNC 4 axis milling machine – Neo7cnc.com
This is a small CNC machine that I made. Unit is about 26 pounds. Cutting area is 4.5x by 5y by 3z. It uses THK actuators. I use dampers on all the steppers to help with vibration. Home switches are currently installed on the x and y.
Duration : 0:6:1
DIY CNC Laser
hack335http://gdata.youtube.com/feeds/api/users/hack335Techcnc, laser, diy, home, madeDIY CNC Laser
Duration : 0:3:29
